SC SERIES SERVO CONTROLS
1. Strong overload: the instantaneous torque up to three times overload, effectively overcome inertia moment of inertia loads at the moment of starting.
2. Built-in mechanical resonance suppression function can effectively suppress the resonance phenomenon of mechanical structure.
3. Excellent high-speed reflect performance: speed response bandwidth is more than 650Hz, the speed is from -3000r/min to 3000r/min. The acceleration time is just 6ms.
4. A full range of models are built-in braking unit and braking resistor.
5.1kw servo drive can be directly 380v power supply to save into line transformer, reduce program costs.
6. With automatic gain adjustment function that can be load inertia identification. The debugging is more convenient. Specifiction ( Please Contact me for more detailed inforamtion):
AC220V -15%~+10% 50/60HZ (1phase & 3 Phase)
Control Method: SPVWM
Feedback: Incremental Encoder 2500 Line
Instruction sequence input (CONT1~5): 1, Start Server 2, Reset 3, +OT 4, -OT 5, Emergency Stop
6, Deviation Clear 7, FWD 8, REV 9, multi-speed 1[ X1] 10, multi-speed 2[ X2]
Instruction sequence output(CONT1~3): 1, RDY 2, PSET 3, Alarm Detection: a 4, Alarm detection: b
5: OT Detection 7, 0 deviation 8, 0 Speed.
Biggest command pulse frequency: input pulse frequency (Biggest) order 500(KHZ) Open-Collector, 200(KHZ)
Input pulse signal form: 1 RS-422 Drive line signal 2, Open collector wired signal
Types of the input pulse: 1, command pulse /Symbol / 2, Forward pulse/reverse pulse
Command pulse compensation: Command pulse *compensation a/Command pulse compensation b as order, Can be set up four command pulse compensation, and can switch at any time
The input position control: 1, Command pulse compensation a choice 1 2, Command pulse compensation a *2 3, Clear deviation 4, Ban command pulse more functions can be allocated in the input command control sequence CONT1~5
Speed Control Range: 1: 5000
Set deceleration time: 0 ~ 10 s Corresponding 0 ~ maximum speed (PN34 parameter set);
Acceleration and deceleration time can be set respectively, can be respectively set two acceleration/deceleration time, and can perform a deceleration S word
External input speed command: Using analog voltage command for speed control, set in the parameter - 10 v + 10 v input, voltage corresponding to speed
Set the speed of internal: Three speed can be set in the internal parameters
speed input control: 1, multistage speed option 1 2, multistage speed choice 2, 3, forward 4, reverse 5, choice acceleration time reduction, the above functions can be allocated in instruction sequence input CONT1 ~ 5
Enter the external torque command: Using analog voltage command torque control, can be set by the parameter - 10 v + 10 v input, voltage and corresponding to the rated torque.
Input torque control: 1, Forward 2, Reserve 3 these functions can be allocated in instruction sequence input CONT1 ~ 5
Regenerative Brake: 3205, 3206 drive internal have built-in braking resistor, other optional
Communicating Function: Can choose the standard MODBUS communication, CAN communication
Monitor Function: Feedback speed, the command speed, the average torque, peak torque, feedback the duty position, command the current position, the position deviation value, the linear bus voltage,
the radiator temperature, input voltage, the input signal and output signal, command cumulative pulse, and frequency of the input pulse sequence, the current alarm, alarm records, sequential patternModel Slection: Size,Our Service:
Samples are Available for Testing and Market Test, also we have a long-term cooperation with DHL,Ups etc, Freight will be much cheaper than their normal one.
2. Warranty of Products
24 months of the warranty. Provide strong technical support.
3. Guides and After-service Consultancy
You can find me all the time, my mobile phone can be always connected.
A. Need an Accessory?
B. Products Repair?
C. Power Problems to Solve?
D. Power Protection Solutions, etc.?
4. OEM Service for ac inverter
All OEM Project can be acceptable by my side, just tell me your requst and then solution will be offered.