| Customization: | Available |
|---|---|
| Task: | Program |
| Structure: | Closed-Loop |
|
Still deciding? Get samples of US$ 103/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Project | Specification | ||
| Basic parameters control mode |
Power supply | 2S/2T | Single phase/Three phase AC220V ±15%,50/60Hz. |
| 4T | Three phase AC380V ±15%,50/60Hz. | ||
| Rated current | AC220V | 1.6~14A,For details, see the corresponding power driver. | |
| AC380V | 3~30A(For details, see the corresponding power driver). | ||
| Control mode | Position control, speed control, torque control. | ||
| Encoder resolution | 17-bit absolute encoder (131072impulse/revolution) | ||
| Speed bandwidth response | 500Hz or above | ||
| Bleeder resistor | Built-in/external (for continuous large inertia loads, refer to the external braking resistor selection specifications) |
||
| Protective function | Overvoltage,undervoltage, overcurrent, overspeed, overload, driver overheating, encoder failure, excessive deviation, etc. |
||
| Use load inertia | Less than 10 times of motor inertia | ||
| Parameter setting method | Local keyboard input, PC software download, 485 communication writing | ||
| Signal configuration | Control input | Maximum pulse frequency | Differential input up to 500Kpps, open collector input 200Kpps |
| Control output | Pulse input method | Pulse+Direction | |
| Pulse input | Electronic gear ratio | 1~32767/1~32767 | |
| Analog input | Two analog inputs (Optional speed or torque setting) | ||
| Pulse output | No encoder feedback output | ||
| Communication interface | RS485(MODBUS-RTU protocol) | ||
| E24V Power | Nternal 24V power supply maximum output 100mA | ||
| 5V Power | Internal 24V power supply maximum output 200mA | ||
| Environment | Temperature | Working temperature: 0-45ºC Storage temperature: -20-80ºC (No freezing) | |
| Humidity | Working/storage ≤90%RH (no condensation) | ||
| IP Level | IP20 | ||
| Altitude | Altitude < 1000m | ||
| Vibration | Vibration≤4.5m/s²,10~60Hz(not allowed to work at resonance point.) | ||
| Item No. | Motor Power(kw) | Motor Rated current(A) | Rated Torque (N.m) |
Rated Speed (RPM) |
Voltage(V) | Motor model | Servo Drive Modle | GW (kg) |
| 40 Flange | 0.10 | 1.00 | 0.32 | 3000 | 220 | DM4-W04M01S30 | FS700-2S-0.1 | 2.50 |
| 60 Flange | 0.20 | 1.40 | 0.64 | 3000 | 220 | DM4-W06M02S30 | FS700-2S-0.2 | 2.50 |
| 0.40 | 2.80 | 1.27 | 3000 | 220 | DM4-W06M04S30 | FS700-2S-0.4 | 3.00 | |
| 80 Flange | 0.75 | 4.60 | 2.39 | 3000 | 220 | DM4-W08M07S30 | FS700-2S-0.75 | 4.00 |
| 1.00 | 5.50 | 3.20 | 3000 | 220 | DM4-W08M10S30 | FS700-2S-1.0 | 4.00 | |
| 130 Flange | 1.30 | 6.80 | 5.40 | 2500 | 220 | DM4-W13L13S25 | FS700-2S-1.3 | 7.50 |
| 130 Flange | 1.50 | 6.80 | 6.00 | 2500 | 220 | DM4-W13L15S25 | FS700-2S-1.5 | 7.30 |
| 2.30 | 9.50 | 8.30 | 2500 | 220 | DM4-W13L22S25 | FS700-2T-2.3 | 8.80 | |
| 2.30 | 9.50 | 15.00 | 1500 | 220 | DM4-13M23S15 | FS700-2T-2.3 | 14.76 | |
| 3.00 | 12.00 | 11.50 | 2500 | 220 | DM4-W13L30S25 | FS700-2T-3.0 | 9.86 | |
| 3.80 | 13.50 | 15.00 | 2500 | 220 | DM4-13M38S25 | FS700-2T-3.8 | 13.86 | |
| 180 Flange | 3.00 | 12.00 | 19.00 | 1500 | 220 | DP4-18M30S15 | FS700-2T-3.0 | 19.64 |
Normal Questions:
1. Can I get some samples?
Yes, Sample order is available for quality check and market test .But you have to pay for it .
2. What's delivery time?
It usually takes about 3-5 working days for small order and 10-15 days for big order .
3. What's your payment terms?
We usually accept all kinds of payment terms .Such as T/T,L/C, Western Union.Cash.
4. What's your warranty terms?
We offer 24 months warranty time .
5. Do you have the products in stock?
Depends on your request ,We have standard models in stock. Some special products and big order will be newly produced according to your order .
6. Can I mix different power in one container .
Yes ,Different models can be mixed up in one container ,even one order .
7. How does your factory do the quality control?
Quality is priority ,we always attach the importance to quality control from the beginning to the end of the production .every product will be fully assembled and carefully tested before packing and shipping .
8. Can you sell spare parts ?
If you are using our products .we can sell spare parts to you . But we couldn't sell the half-finished products.
9.I would like to know if you have a partner for export?
Yes .We have the right to export and can sell electrical product all over the world..
10. Can you make the inverter and soft starter control boards (switchgear)?
Yes. We have a lot of experience to design frequency inverter and soft starter cabinet according to your request,and our factory can do soft starter by ourselves.
11.Can the inverter connect with computer?
Yes .All inverters have built-in RS485 port .and support Modbus communication protocol.
12.How can I trust you ?
Our company has been audited and approved ISO9001,CE.CCC. Assessment report will could be sent to you by e-mail. and we will take all the responsibility once problem during warranty time.
){kind=link}