Economical 220V Single Phase Inverter VFD 1.5kw 2HP V/F Control

Product Description

 

 

Product Parameters

Electrical Specification
Input Voltage	Single Phase/Three Phase 200~240V,  Three Phase 380~440V Fluctuate no more than±10%,Imbalance Rate <3%
Input Frequency	50/60Hz ± 5%
Output Voltage	0V~Input Voltage
Output Frequency	Vector Control:0~300Hz V/F   Control:0~3200Hz
Performance
Overload Capacity	150% rated output current for 1 minute, 180% rated output current for 2 seconds
Control Method	Open-loop vector control (SVC), V/F control
Run Command Setting Method	Operation Panel Setting, External Terminal Setting,Communication Setting
Speed Setting Method	Digital setting, analog setting/pulse setting, communication setting
Speed Setting Resolution	Digital setting: 0.01Hz, Analog setting: 1% X maximum frequency
Speed Control Accuracy	SVC:±0.5%
Speed Control Range	SVC:1:100
Torque Control Response	SVC:<200ms
Starting Torque	SVC:150% rated torque/0.5Hz
Special Feature
Programmable Input & Output Terminals	Input& Output terminal function can be edited
Process PID Adjustment Function	Built-in process PID module
Simple PLC Function	Built-in simple PLC module, which can realize timing and multi-segment frequency output
Textile Wobble Function	Built-in textile swing frequency function module
Protective function
Overvoltage Stall	Bus voltage automatic control to prevent overvoltage fault
Automatic Current Limiting Protection	Output current is automatically limited to prevent over-current faults
Overload Pre-Alarm & Alarm	Overload Pre-warning and protection
Output Phase Loss Protection	Output phase loss automatic detection and alarm function
Overvoltage & Overflow Stall Control	Automatically limit current and voltage during operation to prevent frequent over-current and over-voltage tripping
Output Short-to-Ground Protection	Effective protection function for output short circuit to ground
Output Phase-to-Phase Short Circuit Protection	Output interphase short circuit effective protection function
Input & Output
External analog power supply	+10V,load capacity 100mA
External digital power supply	+24V,load capacity 200mA
Analog Input	AI1:Voltage 0~10V/0-20mA
Analog Voltage Output	AOV:0~10V
Analog Current Output	AOI:0~20mA
Digital Input	DI1~DI5(DI5 can be selected as a high-speed pulse signal)
Digital Output	FM:FM can be selected as high-frequency pulse signal output
Relay output	TA/TB/TC:Contact rating 250VAC/3A or 30VDC/1A
MODBUS Communication	A+,B-
Operation Display
LED Display	Set frequency, output frequency, output voltage, output current, motor speed, output torque, digital terminals, status parameters, programming menu parameters and fault codes etc.
Indicator Light	3 units indicators, 3 status indicators
Environmental characteristics
Working Temperature	-10~+40ºC, Maximum temperature is 50°C, Air Temperature change is less than 0.5°C/min,40~50ºC Derating is required, output current derating 2% for each 1ºC
Storage Environment Temperature	-40~+70ºC
Application	Indoor, free from direct sunlight, dust, corrosive gas, flammable gas, oil mist, water vapor, dripping water or salt  etc.
Altitude	Less than 1000 meters, derating is required for more than 1000 meters
Humidity	Less than 95%RH, no condensation
Vibration resistance	3.5m/s² at 2~9Hz, 10m/s² at 9~200Hz (IEC60721-3-3)
Protection Degree	IP20
Pollution Level	Class 2 (dry, non-conductive dust pollution)
Certification
CE	The whole series has passed CE certification
Optional accessories
Keypad	The whole series supports external keyboard through standard network cable

 

Model Selection

Item No.	Adaptable Motor (kW)	Input Current (A)	Output Current (A)	Rate Capacity (kVA)	W (mm)	H (mm)	D (mm)	W1 (mm)	H1 (mm)	Diameter (mm)	GW (kg)
1 Phase Input and 3 Phase Output  220V (-15%~+15% Tolerance)
FC100E-2S-0.4G	0.40	6.50	2.10	0.70	85.00	142.00	116.00	73.00	136.00	Ø5	1.30
FC100E-2S-0.75G	0.75	8.20	4.00	1.50	85.00	142.00	116.00	73.00	136.00	Ø5	1.30
FC100E-2S-1.5G	1.50	14.00	7.00	3.00	85.00	142.00	116.00	73.00	136.00	Ø5	1.30
FC100E-2S-2.2G	2.20	23.00	9.60	4.00	85.00	142.00	116.00	73.00	136.00	Ø5	1.30
FC100E-2S-4.0G	4.00	39.00	16.50	5.90	106.50	240.50	148.00	96.00	230.00	Ø5	3.50
FC100E-2S-5.5G	5.50	60.00	25.00	8.50	106.50	240.50	148.00	96.00	230.00	Ø5	5.00
3 Phase Input and 3 Phase Output  220V (-15%~+15% Tolerance)
FC100E-2T-4.0G	4.00	19.00	16.50	5.90	106.50	240.50	148.00	96.00	230.00	Ø5	4.00
FC100E-2T-5.5G	5.50	28.00	25.00	8.50	106.50	240.50	148.00	96.00	230.00	Ø5	5.00
FC100E-2T-7.5G	7.50	35.00	30.00	11.00	106.50	240.50	148.00	96.00	230.00	Ø5	5.20
FC100E-2T-11G	11.00	47.00	45.00	16.00	106.50	240.50	148.00	96.00	230.00	Ø5	5.60
3 Phase Input and 3 Phase Output  380V (-15%~+15% Tolerance)
FC100E-4T-0.75G	0.75	3.40	2.10	1.50	85.00	142.00	116.00	73.00	136.00	Ø5	1.50
FC100E-4T-1.5G	1.50	5.00	3.80	3.00	85.00	142.00	116.00	73.00	136.00	Ø5	1.50
FC100E-4T-2.2G	2.20	5.80	5.10	4.00	85.00	142.00	116.00	73.00	136.00	Ø5	1.50
FC100E-4T-4.0G	4.00	10.50	9.00	5.90	95.00	180.00	120.00	83.00	168.00	Ø5	1.50
FC100E-4T-5.5G	5.50	14.60	13.00	8.90	95.00	180.00	120.00	83.00	168.00	Ø5	3.50
FC100E-4T-7.5G	7.50	19.00	17.00	11.00	106.50	240.50	148.00	96.00	230.00	Ø5	4.00
FC100E-4T-11G	11.00	28.00	25.00	16.00	106.50	240.50	148.00	96.00	230.00	Ø5	5.00
FC100E-4T-15G	15.00	35.00	32.00	21.00	106.50	240.50	148.00	96.00	230.00	Ø5	5.20
1 Phase lnput 220V and 3 Phase Output 380V(-15%-+15% Tolerance)
FC100E-2S4T-0.75G	0.75	7.50	2.50	1.50	85.00	142.00	116.00	73.00	136.00	Ø5	1.50
FC100E-2S4T-1.5G	1.50	11.00	3.70	3.00	85.00	142.00	116.00	73.00	136.00	Ø5	1.50
FC100E-2S4T-2.2G	2.20	15.00	5.00	4.00	85.00	142.00	116.00	73.00	136.00	Ø5	1.50
FC100E-2S4T-4.0G	4.00	26.00	8.50	5.90	95.00	180.00	120.00	83.00	168.00	Ø5	1.50
FC100E-2S4T-5.5G	5.50	39.00	13.00	8.90	95.00	180.00	120.00	83.00	168.00	Ø5	3.50

Typical Application

Company Profile

Production Flow

Certifications

Payment & Shipping

 

FAQ

Something you will care:              
    
1.   Can I get some samples?
Yes, Sample order is available for quality check and market test .But you have to pay for it .
2.   What's delivery time?
It usually takes about 3-5 working days for small order and 10-15 days for big order .
3.   What's your payment terms?
We usually accept all kinds of payment terms .Such as T/T,L/C, Western Union.Cash.
4.   What's your warranty terms?
We offer 24 months warranty time .
5.   Do you have the products in stock?
Depends on your request ,We have standard models in stock. Some special products and big order will be newly produced according to your order .
6.   Can I mix different power in one container .
Yes ,Different models can be mixed up in one container ,even one order .
7.   How does your factory do the quality control?
Quality is priority ,we always attach the importance to quality control from the beginning to the end of the production .every product will be fully assembled and carefully tested before packing and shipping .
8.   Can you sell spare parts ?
If you are using our products .we can sell spare parts to you . But we couldn't sell the half-finished products.
9.I would like to know if you have a partner for export?
Yes .We have the right to export and can sell electrical product all over the world..
10. Can you make the inverter and soft starter control boards (switchgear)?
Yes. We have a lot of experience to design frequency inverter and soft starter cabinet according to your request,and our factory can do soft starter by ourselves.
11.Can the inverter connect with computer?
Yes .All inverters have built-in RS485 port .and support Modbus communication protocol. 
12.How can I trust you ?
Our company has been audited and approved ISO9001,CE.CCC. Assessment report will could be sent to you by e-mail. and we will take all the responsibility once problem during warranty time.