RS485 Communication 1kw 3000rpm High Speed AC Servo Drive

Product Description

 

Product Parameters

Project		Specification
Basic parameters control mode	Power supply	2S/2T	Single phase/Three phase AC220V ±15%,50/60Hz.
		4T	Three phase AC380V ±15%,50/60Hz.
	Rated current	AC220V	1.6~14A,For details, see the corresponding power driver.
		AC380V	3~30A(For details, see the corresponding power driver).
Control mode		Position control, speed control, torque control.
Encoder resolution		17-bit absolute encoder (131072impulse/revolution)
Speed bandwidth response		500Hz or above
Bleeder resistor		Built-in/external (for continuous large inertia loads, refer to the external braking resistor selection specifications)
Protective function		Overvoltage,undervoltage, overcurrent, overspeed, overload, driver overheating, encoder failure, excessive deviation, etc.
Use load inertia		Less than 10 times of motor inertia
Parameter setting method		Local keyboard input, PC software download, 485 communication writing
Signal configuration	Control input	Maximum pulse frequency	Differential input up to 500Kpps, open collector input 200Kpps
	Control output	Pulse input method	Pulse+Direction
	Pulse input	Electronic gear ratio	1~32767/1~32767
	Analog input	Two analog inputs (Optional speed or torque setting)
	Pulse output	No encoder feedback output
	Communication interface	RS485(MODBUS-RTU protocol)
	E24V Power	Nternal 24V power supply maximum output 100mA
	5V Power	Internal 24V power supply maximum output 200mA
Environment	Temperature	Working temperature: 0-45ºC Storage temperature: -20-80ºC (No freezing)
	Humidity	Working/storage ≤90%RH (no condensation)
	IP Level	IP20
	Altitude	Altitude < 1000m
	Vibration	Vibration≤4.5m/s²,10~60Hz(not allowed to work at resonance point.)

Model Selection

Item No.	Motor Power(kw)	Motor Rated current(A)	Rated Torque (N.m)	Rated Speed (RPM)	Voltage(V)	Motor model	Servo Drive Modle	GW (kg)
40 Flange	0.10	1.00	0.32	3000	220	DM4-W04M01S30	FS700-2S-0.1	2.50
60 Flange	0.20	1.40	0.64	3000	220	DM4-W06M02S30	FS700-2S-0.2	2.50
	0.40	2.80	1.27	3000	220	DM4-W06M04S30	FS700-2S-0.4	3.00
80 Flange	0.75	4.60	2.39	3000	220	DM4-W08M07S30	FS700-2S-0.75	4.00
	1.00	5.50	3.20	3000	220	DM4-W08M10S30	FS700-2S-1.0	4.00
130 Flange	1.30	6.80	5.40	2500	220	DM4-W13L13S25	FS700-2S-1.3	7.50
130 Flange	1.50	6.80	6.00	2500	220	DM4-W13L15S25	FS700-2S-1.5	7.30
	2.30	9.50	8.30	2500	220	DM4-W13L22S25	FS700-2T-2.3	8.80
	2.30	9.50	15.00	1500	220	DM4-13M23S15	FS700-2T-2.3	14.76
	3.00	12.00	11.50	2500	220	DM4-W13L30S25	FS700-2T-3.0	9.86
	3.80	13.50	15.00	2500	220	DM4-13M38S25	FS700-2T-3.8	13.86
180 Flange	3.00	12.00	19.00	1500	220	DP4-18M30S15	FS700-2T-3.0	19.64

 

Typical Application

 

Company Profile

 

Production Flow

 

Certifications

 

Payment & Shipping

 

FAQ

Normal Questions:
                   
1.   Can I get some samples?
Yes, Sample order is available for quality check and market test .But you have to pay for it .
2.   What's delivery time?
It usually takes about 3-5 working days for small order and 10-15 days for big order .
3.   What's your payment terms?
We usually accept all kinds of payment terms .Such as T/T,L/C, Western Union.Cash.
4.   What's your warranty terms?
We offer 24 months warranty time .
5.   Do you have the products in stock?
Depends on your request ,We have standard models in stock. Some special products and big order will be newly produced according to your order .
6.   Can I mix different power in one container .
Yes ,Different models can be mixed up in one container ,even one order .
7.   How does your factory do the quality control?
Quality is priority ,we always attach the importance to quality control from the beginning to the end of the production .every product will be fully assembled and carefully tested before packing and shipping .
8.   Can you sell spare parts ?
If you are using our products .we can sell spare parts to you . But we couldn't sell the half-finished products.
9.I would like to know if you have a partner for export?
Yes .We have the right to export and can sell electrical product all over the world..
10. Can you make the inverter and soft starter control boards (switchgear)?
Yes. We have a lot of experience to design frequency inverter and soft starter cabinet according to your request,and our factory can do soft starter by ourselves.
11.Can the inverter connect with computer?
Yes .All inverters have built-in RS485 port .and support Modbus communication protocol. 
12.How can I trust you ?
Our company has been audited and approved ISO9001,CE.CCC. Assessment report will could be sent to you by e-mail. and we will take all the responsibility once problem during warranty time.