| Application: | High-performance Transducer, Three Phase Transducer, General Transducer, Single-phase Transducer, High Frequency Converter Transducer |
|---|---|
| Output Type: | Single |
| Principle of Work: | V/F Control Transducer |
| Electrical Specification | |
| Input Voltage | Single Phase/Three Phase 200~240V Fluctuate no more than±10%,Imbalance Rate <3% |
| Input Frequency | 50/60Hz ± 5% |
| Output Voltage | 0V~Input Voltage |
| Output Frequency | 0~300Hz |
| Performance | |
| Overload Capacity | 150% rated output current for 15s |
| Control Method | Vector control, V/F control |
| Run Command Setting Method | Operation panel setting, external terminal setting, communication setting |
| Speed Setting Method | Digital setting, analog setting, communication setting |
| Speed Setting Resolution | Digital setting: 0.01Hz, Analog setting: 1% × maximum frequency |
| Special Feature | |
| Programmable Input & Output Terminals | Input& Output terminal function can be edited |
| Process PID Adjustment Function | Built-in process PID module |
| Protective function | |
| Overvoltage Stall | Bus voltage automatic control to prevent overvoltage fault |
| Automatic Current Limiting Protection | Output current is automatically limited to prevent over-current faults |
| Overload Pre-Alarm & Alarm | Overload Pre-warning and protection |
| Output Phase Loss Protection | Output phase loss automatic detection and alarm function |
| Input & Output | |
| External analog power supply | +5V,load capacity 20mA |
| External digital power supply | +24V,load capacity 100mA |
| Analog Input | AI:Voltage 0~5V |
| Digital Input | X1~X5 |
| Digital Output | Y1 |
| MODBUS Communication | A+,A- |
| Operation Display | |
| LED Display | Set frequency, output frequency, output voltage, output current, programming menu parameters and fault codes etc. |
| Indicator Light | 3 unit indicators, 3 status indicators |
| Environmental characteristics | |
| Working Temperature | -10~+40ºC, Maximum temperature is 50°C, Air Temperature change is less than 0.5°C/min,40~50ºC Derating is required, output current derating 2% for each 1ºC |
| Storage Environment Temperature | -40~+70ºC |
| Application | Indoor, free from direct sunlight, dust, corrosive gas, flammable gas, oil mist, water vapor, dripping water or salt etc. |
| Altitude | Less than 1000 meters, derating is required for more than 1000 meters |
| Humidity | Less than 95%RH, no condensation |
| Vibration resistance | 3.5m/s² at 2-9Hz, 10m/s² at 9-200Hz (IEC60721-3-3) |
| Protection Degree | IP20 |
| Item No. | Adaptable Motor (kW) | Input Current (A) | Output Current (A) | Rate Capacity (kVA) | W (mm) |
H (mm) |
D (mm) |
W1 (mm) |
H1 (mm) |
Diameter (mm) |
GW (kg) |
| 1 Phase Input and 3 Phase Output 220V (-15%~+15% Tolerance) | |||||||||||
| FC20-2S-0.2 | 0.20 | 2.30 | 1.60 | 3.00 | 53.00 | 160.00 | 102.00 | 80.00 | 89.50 | Ø4.5 | 1.08 |
| FC20-2S-0.4 | 0.40 | 3.20 | 2.10 | 3.80 | 53.00 | 160.00 | 102.00 | 80.00 | 89.50 | Ø4.5 | 1.08 |
| FC20-2S-0.75 | 0.75 | 4.00 | 3.70 | 5.60 | 53.00 | 160.00 | 102.00 | 80.00 | 89.50 | Ø4.5 | 1.08 |
| FC20-2S-1.1 | 1.10 | 8.30 | 5.50 | 9.90 | 53.00 | 160.00 | 102.00 | 80.00 | 89.50 | Ø4.5 | 1.08 |
